Kardol  Material Safety Data Sheets

Car Care - Soaps - Cleaners - Polishes - Compounds

Thinners - Solvents - Reducers  - Paint Strippers  

Clears - Primers - Hardeners - Activators - Paints - Resins  

Kardol Home | Products | Table of Contents | Search | Catalog Cover | Mail Order | Feedback

Just point and click on the product to go to the Material Safety Data Sheet

 

	Car Appearance & Detail Products Sheet
Part No.	Description	Size	Units/Case
100301	Green Panther Multi-Purpose Cleaner	Gallons	4/Case
100331	Wash & Shine Concentrate	Gallons	4/Case
100491	Re-New Vinyl & Rubber Dressing	Gallons	4/Case
100481	Re-New (2) Water Based Vinyl Dressing	Gallons	4/Case
103041	Hi-Power Biodegradable Cleaner	Gallons	4/Case
100211	Aluma-Brite	Gallons	4/Cases
100201	Acra-Lac	Gallons	4/Case
103031	Clear Coat Wheel Cleaner	Gallons	4/Case
100121	White Sidewall Cleaner	Gallons	4/Case
100350	19 OZ. Aerosol Glass Cleaner	19 Oz.	12/Cases
100351	Automotive Grade Glass Cleaner	Gallons	4/Case
100451	Glaze & Seal	Gallons	4/Case
100461	Wipe & Shine	Gallons	4/Case
100701	Wild Cherry Air Freshener	Gallons	4/Case
100708	Tropical Blend Air Freshener	Gallons	4/Case
100721	Spearmint Air Freshener	Gallons	4/Case
101039	New Car Scent Air Freshener	Gallons	4/Case

 

	Reducers
Part No.	Description	Size	Units/Case
150140	Multi-Purpose Enamel Reducer	Gallons	4/Cases
150150	Medium/Premium Reducer	Gallons	4/Case
150160	Slow Ultra Premium Reducer	Gallons	4/Case
150170	Multi-Purpose S/E Reducer (Fast)	Gallons	4/Case
150180	Premium S/E Reducer (Medium)	Gallons	4/Case
150610	Urethane Reducer (Fast)	Gallons	4/Case
150620	Urethane Reducer (Medium)	Gallons	4/Case
150630	Urethane Reducer (Slow)	Gallons	4/Case
150810	Fast Reactive Reducer	Gallons	4/Case
150820	Medium Reactive Reducer	Gallons	4/Case
150830	Slow Reactive Reducer	Gallons	4/Case

 

	Solvents
Part No.	Description	Size	Units/Case
105072	Acetone	Gallons	4/Case
105037	MEK (Methyl Ethyl Ketone)	Gallons	4/Case
105003	Mineral Spirits	Gallons	4/Case
105033	Toluene	Gallons	4/Case
505022	Denatured Alcohol	Gallons	4/Case
502062	Isopropanol 99	5 Gallon	1
105062	VM & P Naphta	Gallons	4/Case
505009	Paint Thinner	Gallons	4/Case
105028	Xylene	Gallons	4/Case

 

	Primers
Part No.	Description	Size	Units/Case
150398	2 - K Tintable Urethanre Primer	Gallons	4/Case
150300	2-K Urethane Primer V.O.C. California	Gallons	4/Case
150911	High Build Acrylic Primer	Gallons	4/Case
159051	Perma-Prime Acrylic Primer	Gallons	4/Case
159061	Perma-Primer Acrylic Primer	Gallons	4/Case

Wash & Shine

                        MSDS #  100331

Page 1 of 2

KARDOL QUALITY PRODUCTS, INC.

265 S. West St.

Lebanon, OH 45036

(513) 933-8206      Fax:  (513) 932-6900

___________________________________________________

__________________________________________________

MATERIAL SAFETY DATA SHEET

Trade Name: WASH & SHINE, #100334, 100331, 100335, 100336

Section 1:            Material Identification

Chemical Name:                                      CAS                     %                        OSHA (TWA)

Caustic Soda       1310-73-2                0-10                     2             mg/m3

Cocoethanolamide  8051-30-7                0-10                      3                ppm

Sodium Xylene Sulfonate 1300-72-7         0-10                 NA

Non-hazardous Ingredients  NA              70-90       NA         

Section 2:            Physical and Chemical Properties

Boiling Point:                        212° F

Vapor Pressure:                        760  mm  Hg at 20°F

Vapor Density:                        Heavier than air

Evaporation rate:                        Slower than Ethyl Ether

Specific Gravity:                        1.02  gm/cc

Appearance & Odor:                        Red liquid, with mild odor.

Section 3:            Fire and Explosion Hazard Data

Flash Point:                        NA                        PH:  9.5 - 10.5

Flammability Limits:                        NA

Extinguisher Media:                        Dry chemical, CO2, or  foam.

Special Fire Fighting:                        None known

Unusual Fire Hazard:                        Non known

Section 4:            Reactivity Hazard Data

This material is stable under normal conditions.

Polymerization will not occur.

Avoid:                        Prolonged storage above 150° F, exposure to excessive heat or                         open flame, strong acids, peroxide or other oxidizing agents.

                                                                                      MSDS # 100331

Page 2 of 2

Wash & Shine

Section 5:            Health Hazard Data

Primary routes of entry:  Inhalation and Skin absorption.

SIGN & SYMPTOMS OF EXPOSURE:  Irritating to skin, eyes and all parts of respiratory tract.

EMERGENCY FIRST AID PROCEDURE:

Eye contact:                        Flush promptly with large amounts of water for 15 minutes.  Seek

                        medical attention immediately.

Skin contact:                        Wash thoroughly with soap and water.  Remove contaminated clothing

                        and seek medical attention.         

Inhalation:                        Remove victim to a well ventilated area.  Use oxygen or artificial

                        respiration as required.  Seek medical attention immediately.

INGESTION:                        DO NOT INDUCE VOMITING. If victim is conscious and alert give two                         glasses of water. Seek medical attention immediately.

Section 6:            Control and Protective Measures

Respiratory:                        Chemical respirator with self-contained air supply is required when                         concentration  of vapor exceed the established exposure limits.

Gloves:                        Plastic or rubber chemical resistant gloves are required.

Eye protection:                        Safety goggles are recommended.

Ventilation:                        Any combination of local and general ventilation, to draw fumes away from

                        workers.

Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.

Section 7:            Precautions for Safe Handling and Use.

IN CASE OF SPILL:    “FLOOR MAY BE SLIPPERY”

                        Extinguish all sources of flame and ignition.  Absorb with inert material such as vermiculite or sand.  Sweep up and collect in containers to dispose as solid waste.  Wash the area water. 

WASTE DISPOSAL:

                        Dispose of in accordance with local, state and federal laws and regulations.

OTHER PRECAUTIONS:                        Store in cool dry place; keep away from sources of heat and ignition.   Use with adequate ventilation.

                                       

KEEP OUT OF REACH OF CHILDREN!!

DOT Shipping Name:                                                              HAZARD INDEX

Compound, Liquid Cleaning, NOI                          Health                                      1

                                                                                                Flammability                        0

                                                                                                Reactivity                        0

NA:  NOT APPLICABLE                                                                    Revised:  April 29, 1996

Glaze & Seal

Wipe & Shine

Aluma-Brite

Green Panther 2

Acra-Lac

                        MSDS #  100201

Page 1 of 2

KARDOL QUALITY PRODUCTS, INC.

265 S. West St.

Lebanon, OH 45036

(513) 933-8206      Fax:  (513) 932-6900

___________________________________________________

__________________________________________________

MATERIAL SAFETY DATA SHEET

Trade Name: Acra -Lac, #100204, 100201, 100205, 100206

Section 1:            Material Identification

Chemical Name:                                      CAS                     %                        OSHA (PEL)

Mineral Spirits       8052-41-3              30-40                  100                ppm

V M & P Naphtha     64742-89-8              25-35                  300                ppm

Xylene    1330-20-7       20-30                  100                ppm

Section 2:            Physical and Chemical Properties

Boiling Point:                        285° F

Vapor Pressure:                        30  mm  Hg at 100°F

Vapor Density:                        Heavier than air

Solubility:                        8.0

Evaporation rate:                        Slover than Ethyl Ether

Specific Gravity:                        .80 gm/cc

Appearance & Odor:                        Clear liquid.  Aromatic odor.

V.O.C.:                        6.55 #/gal.   785 g/liter 

Section 3:            Fire and Explosion Hazard Data

Flash Point:                        75° F  (Tag closed cup)

PH:                        N/A

Flammability Limits:                        LEL  .7    UEL  7.0

Extinguisher Media:                        Dry chemical, foam, CO2

Special Fire Fighting:                        Fire-fighter should wear self-contained breathing apparatus

                        to avoid inhalation of smoke and vapor.

Unusual Fire Hazard:                        Containers exposed to heat from the fires should be cooled

                        with water to prevent vapor pressure build up which could result

                        in container rupture.

Section 4:            Reactivity Hazard Data

This material is stable under normal conditions.  Photochemically reactive.

Polymerization will not occur.

Avoid:                        Heat, sparks, flame and contact with strong oxidizing agents.

                                                                                      MSDS # 100201

Page 2 of 2

Acra-Lac

Section 5:            Health Hazard Data

Primary routes of entry:  Inhalation and Skin absorption.

SIGN & SYMPTOMS OF EXPOSURE:  Irritating to skin, eye and all parts of respiratory tract.

EMERGENCY FIRST AID PROCEDURE:

Eye contact:                        Flush promptly with large amounts of water for 15 minutes, seek

                        medical attention immediately.

Skin contact:                        Wash thoroughly with soap and water.  Remove contaminated clothing

                        and seek medical attention.         

Inhalation:                        Remove victim to a well ventilated area.  Use oxygen or artificial

                        respiration as required.  Seek medical attention immediately..

INGESTION:                        DO NOT INDUCE VOMITING.  Keep head below hips to prevent                         aspiration of liquid into the lungs.Seek medical attention immediately.

Section 6:            Control and Protective Measures

Respiratory:                        Chemical respirator is recommended when concentration  of vapor exceed the                         established exposure limits.

Gloves:                        Plastic or rubber chemical resistant gloves are required.

Eye protection:                        Full face shield or safety goggles is required.

Ventilation:                        Any combination of local and general ventilation, to draw fumes away from

                        workers.

Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.

Section 7:            Precautions for Safe Handling and Use.

IN CASE OF SPILL:   “THIS MATERIAL IS FLAMMABLE”

Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand.  Sweep up and collect in containers to dispose as solid waste.  Wash the area with tri-sodium phosphate and water. 

WASTE DISPOSAL:

                        Dispose of in accordance with local, state and federal laws and regulations.

OTHER PRECAUTIONS:                        Store in cool dry place; keep away from sources of heat and ignition.  Use explosion proof equipment.  Open containers slowly to relieve any internal pressure.  Use with adequate ventilation.

 

KEEP OUT OF REACH OF CHILDREN!! 

DOT Shipping Name:                                                              HAZARD INDEX

PAINT RELATED MATERIAL                            Health                                      2

UN#1263                                                                                Flammability                        3

                                                                                                Reactivity                        0

(Contains Naphtha, Solvent)

NA:  NOT APPLICABLE                                                                    Revised:  January 22, 1992

Fine Compound

Medium Compound

Fast Compound

Chemical Cutting Cream

Glass Concenstrate

High Power

Clear Coat Wheel Cleaner

E-Z Buff

White Sidewall

                  MSDS #  100121

Page 1 of 2

KARDOL QUALITY PRODUCTS, INC.

265 S. West St.

Lebanon, OH 45036

(513) 933-8206      Fax:  (513) 932-6900

___________________________________________________

__________________________________________________

MATERIAL SAFETY DATA SHEET

Trade Name: White Side Wall Cleaner #100124, #100121, #100125, #100126

Section 1:            Material Iden tification

Chemical Name:                                      CAS                     %                        OSHA (TWA)

Caustic Soda       1310-73-2                0-10                      2            mg/m3

Sodium-2-Ethyl Hexyl Sulfate         126-92-1                0-10                 NA

Dodecyl Benzene Sulfonic

        Acid Linear   27176-72-7         0-10                 NA

2-Butoxyethanol         111-76-2                0-10                    25                ppm

Non-Hazardous Ingredient   NA              70-80                  NA                     

Section 2:            Physical and Chemical Properties

Boiling Point:                             212°  F

Vapor Pressure:                        760  mm Hg at 20°  F

Vapor Density:                          Heavier than air

Evaporation rate:                       Slower than Ethyl Ether

Specific Gravity:                        1.02   gm/cc

Appearance & Odor:                Florescent yellow liquid, with mild odor.

Section 3:            Fire and Explosion Hazard Data

Flash Point:                        NE                        PH:  9.5 - 10.5

Flammability Limits:                        NA

Extinguisher Media:                        Dry chemical, CO2, or  foam.

Special Fire Fighting:                        None known.

Unusual Fire Hazard:                        None known.

Section 4:            Reactivity Hazard Data

This material is stable under normal conditions.

 Polymerization will not occur.

 Avoid: Prolonged storage above 150° F, exposure to excessive heat or open flame, strong acids or basis, and oxidizing agents.

 

                                                                               MSDS # 100121

Page 2 of 2

White Sidewall Cleaner

Section 5:            Health Hazard Data

Primary routes of entry:  Inhalation and Skin absorption.

 SIGN & SYMPTOMS OF EXPOSURE:  Irritating to skin, eyes and all parts of respiratory tract.

 EMERGENCY FIRST AID PROCEDURE:

Eye contact:    Flush promptly with large amounts of water for 15 minutes, seek

                        medical attention immediately.

Skin contact:   Wash thoroughly with soap and water.  Remove contaminated clothing

                        and seek medical attention.         

Inhalation:      Remove victim to a well ventilated area.  Use oxygen or artificial

                        respiration as required.  Seek medical attention immediately..

INGESTION: DO NOT INDUCE VOMITING.  If victim is conscious and alert give two glasses of water.  Seek medical attention immediately.

Section 6:            Control and Protective Measures

Respiratory:     Chemical respirator is recommended when the concentration of vapor exccds

                        the established exposure limits.

Gloves:            Plastic or rubber chemical resistant gloves are recommended.

Eye protection: Safety glasses are recommended.

Ventilation:      Any combination of local and general ventilation, to draw fumes away from

                        workers.

Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.

Section 7:            Precautions for Safe Handling and Use.

IN CASE OF SPILL:   “FLOOR MAY BE SLIPPERY”

                        Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand.  Sweep up and collect in containers to dispose as solid waste.  Wash the area with water. 

WASTE DISPOSAL:

                        Dispose of in accordance with local, state and federal laws and regulations.

OTHER PRECAUTIONS:                        Store in cool dry place below 90° ; keep away from sources of heat and ignition. Use with adequate ventilation.

KEEP OUT OF REACH OF CHILDREN!!

DOT Shipping Name:                                                              HAZARD INDEX

Compound, Liquid Cleaning                                                       Health                                 1

N.O.I.                                                                                      Flammability                        0

                                                                                                Reactivity                              0

NA:  NOT APPLICABLE                                                                    Revised:  May 3, 1996

NA:  NOT APPLICABLE                                                                    Revised:  January 17,1997

Automotive Resins

                        MSDS #  102384

Page 1 of 2

KARDOL QUALITY PRODUCTS, INC.

265 S. WEST STREET

LEBANON, OH 45036

(513) 933-8206  FAX: (513) 932-6900

___________________________________________________

__________________________________________________

MATERIAL SAFETY DATA SHEET

Trade Name: AUTOMOTIVE RESIN #102383,102384,102385

Section 1:         Material Identification

Chemical Name:                                                           CAS                  %       OSHA (TWA)

Styrene Monomer                                                      100-42-5              35      50        ppm

Unsaturated Polyester Resin                                               N/A              65      N/A

Section 2:         Physical and Chemical Properties

Boiling Point:                            295° F

Vapor Pressure:                        4.5 (Styrene) at 20°  F

Vapor Density:                         Heavier than air

Evaporation rate:                      Slower than Butyl Acetate

Specific Gravity:                       1.8 gm/cc

Appearance & Odor:                Amber opaque liquid, pungent odor.

Section 3:         Fire and Explosion Hazard Data

Flash Point:                               89° F  Method used TOC 

Flammability Limits:                  LEL  1.1    UEL  6.1

Extinguisher Media:                   Water fog, dry chemical, CO2, and  foam, or any class B          extinguishing agent.

Special Fire Fighting:                 Fire-fighter should wear self-contained breathing apparatus

                                                to avoid inhalation of smoke and vapor.

Unusual Fire Hazard:                If exposed to elevated temperature for extended length of time   spontaneous exothermic polymerization may occur resulting in                             violent rupture.

Section 4:         Reactivity Hazard Data

This material is stable under normal conditions.

Polymerization may occur if exposed to high temperature.

Avoid:                                      Storage in open container, prolonged storage above

                                                100°    F, exposure to excessive heat or open flame,

                                                strong acids, peroxide or other oxidizing agents.

                                                                                                                       MSDS # 102384

Page 2 of 2

Automotive Resin

Section 5:         Health Hazard Data

Primary routes of entry:  Inhalation and Skin absorption.

The International Agency for Research on Cancer (IARC) has classified styrene as a possible human carcinogen (class 2B). The IARC 2B classification is not based on significant new evidence that styrene might be a carcinogen but on revised IARC classification scheme and new data on styrene oxide.

SIGN & SYMPTOM