Kardol Quality Products Material Safety Data Sheets
Car Care - Soaps - Cleaners - Polishes - Compounds
Thinners - Solvents - Reducers - Paint Strippers
Clears - Primers - Hardeners - Activators - Paints - Resins
Kardol Home | Products | Table of Contents | Search | Catalog Cover | Mail Order | Feedback
Just point and click on the product to go to the Material Safety Data Sheet
|
Car Appearance & Detail Products Sheet |
|||
| Part No. | Description | Size | Units/Case |
| 100301 | Green Panther Multi-Purpose Cleaner | Gallons | 4/Case |
| 100331 | Wash & Shine Concentrate | Gallons | 4/Case |
| 100491 | Re-New Vinyl & Rubber Dressing | Gallons | 4/Case |
| 100481 | Re-New (2) Water Based Vinyl Dressing | Gallons | 4/Case |
| 103041 | Hi-Power Biodegradable Cleaner | Gallons | 4/Case |
| 100211 | Aluma-Brite | Gallons | 4/Cases |
| 100201 | Acra-Lac | Gallons | 4/Case |
| 103031 | Clear Coat Wheel Cleaner | Gallons | 4/Case |
| 100121 | White Sidewall Cleaner | Gallons | 4/Case |
| 100350 | 19 OZ. Aerosol Glass Cleaner | 19 Oz. | 12/Cases |
| 100351 | Automotive Grade Glass Cleaner | Gallons | 4/Case |
| 100451 | Glaze & Seal | Gallons | 4/Case |
| 100461 | Wipe & Shine | Gallons | 4/Case |
| 100701 | Wild Cherry Air Freshener | Gallons | 4/Case |
| 100708 | Tropical Blend Air Freshener | Gallons | 4/Case |
| 100721 | Spearmint Air Freshener | Gallons | 4/Case |
| 101039 | New Car Scent Air Freshener | Gallons | 4/Case |
|
Compounds & Chemical Cuttings Creams |
|||
| Part No. | Description | Size | Units/Case |
| 105061 | Fast Cut Rubbing Compounds | Gallons | 4/Case |
| 105051 | Medium Cut Rubbing Compounds | Gallons | 4/Case |
| 105041 | Fine Cut Rubbing Compounds | Gallons | 4/Case |
| 105091 | E- Z Buff (Chemical Cutting Cream | Gallons | 4/Case |
| 105011 | Fast Cut Red Paste Compounds | Gallons | 4/Case |
| 105010 | Medium Cut White Paste Compounds | Gallons | 4/Case |
|
Lacquer Thinners |
|||
| Part No. | Description | Size | Units/Case |
| 150900 | Economy Wash Thinner | Gallons | 4/Case |
| 105151 | Fast Color Grade Lacquer Thinner | Gallons | 4/Case |
| 150110 | Multi-Purpose Color Grade Thinner | Gallons | 4/Case |
| 150120 | Premium Color Grade Thinner | Gallons | 4/Case |
| 150190 | V.O.C. Color Grade Thinner (Fast) | Gallons | 4/Case |
| 150192 | V.O.C. Color Grade Thinner (Med) | Gallons | 4/Cases |
| 150196 | V.O.C. Color Grade Thinner (Slow) | Gallons | 4/Case |
| 150191 | V.O.C. Color Grade Thinner (2.0) | Gallons | 4/Case |
|
Clears & Activators |
|||
| Part No. | Description | Size | Units/Case |
| 150662 | Overall Clear 4.2 V.O.C. | Gallons | 4/Case |
| 150664 | Spot & Panel Clear 4.2 V.O.C. | Gallons | 4/Case |
| 150672 | Overall Clear 3.5 V.O.C. | Gallons | 4/Case |
| 150674 | Spot & Panel Clear 3.5 V.O.C. | Gallons | 4/Case |
| 150668 | Overall Clear 2.1 V.O.C. | Gallons | 4/Case |
| 150663 | Fact Clear Coat Activator | Gallons | 4/Cases |
| 150666 | Medium Clear Coat Activator | Gallons | 4/Case |
| 150667 | Slow Clear Coat Activator | Gallons | 4/Case |
|
Reducers |
|||
| Part No. | Description | Size | Units/Case |
| 150140 | Multi-Purpose Enamel Reducer | Gallons | 4/Cases |
| 150150 | Medium/Premium Reducer | Gallons | 4/Case |
| 150160 | Slow Ultra Premium Reducer | Gallons | 4/Case |
| 150610 | Urethane Reducer (Fast) | Gallons | 4/Case |
| 150620 | Urethane Reducer (Medium) | Gallons | 4/Case |
| 150630 | Urethane Reducer (Slow) | Gallons | 4/Case |
| 150170 | Multi-Purpose S/E Reducer (Fast) | Gallons | 4/Case |
| 150180 | Premium S/E Reducer (Medium) | Gallons | 4/Case |
|
Solvents |
|||
| Part No. | Description | Size | Units/Case |
| 105072 | Acetone | Gallons | 4/Case |
| 105037 | MEK (Methyl Ethyl Ketone) | Gallons | 4/Case |
| 105003 | Mineral Spirits | Gallons | 4/Case |
| 105033 | Toluene | Gallons | 4/Case |
| 505022 | Denatured Alcohol | Gallons | 4/Case |
| 502062 | Isopropanol 99 | 5 Gallon |
1 |
| 105062 | VM & P Naphta | Gallons | 4/Case |
| 105028 | Xylene | Gallons | 4/Case |
Body Fillers, Resins & Misc. Product Sheets
Back to Home Page Products & Services
MSDS # 100301
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: GREEN PANTHER #100308, #100304, #100301, #100305,
#100306
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
Caustic Soda
1310-73-2
0-10 2 mg/m3
Sodium-2-Ethyl Hexyl
Sulfate
126-92-1
0-10 NA
Dodecyl Benzene
Sulfonic Acid Linear
27176-72-7
0-10 NA
2-Butoxyethanol
111-76-2
0-10 25 ppm
Non-hazardous Ingredients NA 70-80 NA
Section 2: Physical and Chemical Properties
Boiling Point:
212° F
Vapor Pressure: 760 mm Hg at 20°F
Vapor Density: Heavier than air
Evaporation rate: Slower than Ethyl Ether
Specific Gravity: 1.02 gm/cc
Appearance & Odor: Green liquid, with mild odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: NE PH: 9.5 - 10.5
Flammability Limits: NA
Extinguisher Media: Dry chemical, CO2, or foam.
Special Fire Fighting: None known
Unusual Fire Hazard: Non known
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization will not occur.
Avoid: Prolonged storage above 150° F, exposure to excessive heat or open flame, strong acids or bases, or other oxidizing agents.
MSDS # 100301 Page 2 of 2 Green Panther Section
5: Health
Hazard Data Primary routes of entry: Inhalation and Skin absorption. SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eyes and all parts of
respiratory tract. EMERGENCY FIRST AID
PROCEDURE: Eye contact:
Flush promptly with large amounts of water for 15 minutes, seek
medical attention immediately. Skin contact:
Wash thoroughly with soap and water. Remove
contaminated clothing
and seek medical attention.
Inhalation:
Remove victim to a well ventilated area. Use
oxygen or artificial
respiration as required. Seek medical
attention immediately. INGESTION:
DO NOT INDUCE VOMITING. If victim is
conscious and alert give two
glasses of water. Seek medical attention. Section
6: Control
and Protective Measures Respiratory:
Chemical respirator with self-contained air supply is required when concentration of vapor exceed the established exposure limits. Gloves:
Plastic or rubber chemical resistant gloves are required. Eye protection: Safety goggles are
recommended. Ventilation:
Any combination of local and general ventilation, to draw fumes away from
workers. Other measures
such as protective clothing, shoes, eye wash station and safety showers should be
available. Section
7: Precautions
for Safe Handling and Use. IN CASE OF SPILL:
“FLOOR MAY BE SLIPPERY”
Extinguish all sources of flame and ignition.
Absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as
solid waste. Wash the area with water. WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations. OTHER PRECAUTIONS: Store in cool dry
place; keep away from sources of heat and ignition. KEEP OUT OF REACH OF CHILDREN!! DOT Shipping Name:
HAZARD INDEX Compound, Liquid
Cleaning, NOI
Health
1
Flammability
0
Reactivity
0 NA: NOT APPLICABLE
Revised: April 29, 1996
MSDS # 100331
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: WASH & SHINE, #100334, 100331, 100335, 100336
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
Caustic Soda 1310-73-2
0-10
2
mg/m3
Cocoethanolamide 8051-30-7
0-10
3
ppm
Sodium Xylene
Sulfonate 1300-72-7
0-10
NA
Non-hazardous Ingredients NA 70-90 NA
Section 2: Physical and Chemical Properties
Boiling Point:
212° F
Vapor Pressure: 760 mm Hg at 20°F
Vapor Density: Heavier than air
Evaporation rate: Slower than Ethyl Ether
Specific Gravity: 1.02 gm/cc
Appearance & Odor: Red liquid, with mild odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: NA PH: 9.5 - 10.5
Flammability Limits: NA
Extinguisher Media: Dry chemical, CO2, or foam.
Special Fire Fighting: None known
Unusual Fire Hazard: Non known
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization will not occur.
Avoid: Prolonged storage above 150° F, exposure to excessive heat or open flame, strong acids, peroxide or other oxidizing agents.
MSDS # 100331
Page 2 of 2
Wash & Shine
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eyes and all parts of
respiratory tract.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with large amounts of water for 15 minutes. Seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated clothing
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately.
INGESTION: DO NOT INDUCE VOMITING. If victim is conscious and alert give two glasses of water. Seek medical attention immediately.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator with self-contained air supply is required when concentration of vapor exceed the established exposure limits.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Safety goggles are recommended.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL: “FLOOR MAY BE SLIPPERY”
Extinguish all sources of flame and ignition. Absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
DOT Shipping Name:
HAZARD INDEX
Compound, Liquid
Cleaning, NOI
Health
1
Flammability
0
Reactivity
0
NA: NOT APPLICABLE Revised: April 29, 1996
Green Panther 2
MSDS # 100491
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: Re-New #100498, #100494, #100491, #100495, #100496
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
Mineral Spirits 64742-47-8
75
300
ppm
Non-hazardous Ingredients NA 25 NA
Section 2: Physical and Chemical Properties
Boiling Point:
NA
Vapor Pressure: NA
Vapor Density: Lower than air
Evaporation rate: Slower than Ethyl Ether
Specific Gravity: .77 gm/cc
Appearance & Odor: Clear liquid, typical Mineral Spirits odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: 155° F PH: NA
Flammability Limits: NE
Extinguisher Media: Dry chemical, CO2, or foam.
Special Fire Fighting:
Fire fighter should wear self-contained breathing apparatus to
avoid inhalation of smoke and vapor.
Unusual Fire Hazard: If closed container is exposed to elevated temperatures for extended length of time, violent rupture may occur.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization will not occur. Thermal decomposition will yeild Carbon Monoxide and Carbon Dioxide.
Avoid:
Storeage in open container, prolonged storage above 100° F,
exposure to excessive heat or open flame, strong acids, and
strong alkalies.
MSDS # 100491
Page 2 of 2Re-New
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eyes and all
parts of respiratory tract.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with large amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated clothing
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately.
INGESTION: DO NOT INDUCE VOMITING. Seek medical attention immediately.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator is required.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Safety glasses are required.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with tri-sodium phosphate and water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place below 90° ; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
DOT Shipping Name:
HAZARD INDEX
Petrolium Naphtha
Health
1
UN 1255
Flammability
1
Reactivity
0
NA: NOT APPLICABLE Revised: April 29, 1996
MSDS # 100201
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: Acra -Lac, #100204, 100201, 100205, 100206
Section 1: Material Identification
Chemical Name: CAS % OSHA (PEL)
Mineral Spirits 8052-41-3 30-40 100 ppm
V M & P Naphtha 64742-89-8 25-35 300 ppm
Xylene 1330-20-7 20-30 100 ppm
Section 2: Physical and Chemical Properties
Boiling Point:
285° F
Vapor Pressure: 30 mm Hg at 100°F
Vapor Density: Heavier than air
Solubility: 8.0
Evaporation rate: Slover than Ethyl Ether
Specific Gravity: .80 gm/cc
Appearance & Odor: Clear liquid. Aromatic odor.
V.O.C.: 6.55 #/gal. 785 g/liter
Section 3: Fire and Explosion Hazard Data
Flash Point: 75° F (Tag closed cup)
PH: N/A
Flammability Limits: LEL .7 UEL 7.0
Extinguisher Media: Dry chemical, foam, CO2
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard: Containers exposed to heat from the fires should be cooled
with water to prevent vapor pressure build up which could result
in container rupture.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions. Photochemically reactive.
Polymerization will not occur.
Avoid: Heat, sparks, flame and contact with strong oxidizing agents.
MSDS # 100201
Page 2 of 2
Acra-Lac
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with large amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated clothing
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION:
DO NOT INDUCE VOMITING.
Keep head below hips to prevent
aspiration of liquid into the lungs.Seek
medical attention immediately.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator is recommended when concentration of vapor exceed the established exposure limits.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Full face shield or safety goggles is required.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL: “THIS MATERIAL IS FLAMMABLE”
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with tri-sodium phosphate and water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
DOT Shipping Name: HAZARD INDEX
PAINT RELATED MATERIAL Health 2
UN#1263 Flammability 3
Reactivity 0
(Contains Naphtha, Solvent)
NA: NOT APPLICABLE Revised: January 22, 1992
Medium Compound
Fast Compound
Chemical Cutting Cream
Glass Concenstrate
Clear Coat Wheel Cleaner
MSDS # 100121
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: White Side Wall Cleaner #100124, #100121, #100125,
#100126
Section 1: Material Iden tification
Chemical Name: CAS % OSHA (TWA)
Caustic Soda 1310-73-2 0-10 2 mg/m3
Sodium-2-Ethyl Hexyl Sulfate 126-92-1 0-10 NA
Dodecyl Benzene Sulfonic
Acid Linear 27176-72-7 0-10 NA
2-Butoxyethanol 111-76-2 0-10 25 ppm
Non-Hazardous Ingredient NA 70-80 NA
Section 2: Physical and Chemical Properties
Boiling Point:
212° F
Vapor Pressure: 760 mm Hg at 20° F
Vapor Density: Heavier than air
Evaporation rate: Slower than Ethyl Ether
Specific Gravity: 1.02 gm/cc
Appearance & Odor: Florescent yellow liquid, with mild odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: NE PH: 9.5 - 10.5
Flammability Limits: NA
Extinguisher Media: Dry chemical, CO2, or foam.
Special Fire Fighting: None known.
Unusual Fire Hazard: None known.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
MSDS # 100121
Page 2 of 2
White Sidewall Cleaner
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
Eye contact: Flush promptly with large amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated clothing
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION: DO NOT INDUCE VOMITING. If victim is conscious and alert give two glasses of water. Seek medical attention immediately.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator is recommended when the concentration of vapor exccds
the established exposure limits.
Gloves: Plastic or rubber chemical resistant gloves are recommended.
Eye protection: Safety glasses are recommended.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL: “FLOOR MAY BE SLIPPERY”
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place below 90° ; keep away from sources of heat and ignition. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
DOT Shipping Name: HAZARD INDEX
Compound, Liquid Cleaning Health 1
N.O.I. Flammability 0
Reactivity 0
NA: NOT APPLICABLE Revised: May 3, 1996
Thinners & Solvents
5151 Lacquer Thinner
MSDS # T004
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
___________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: ACRYLIC LACQUER THINNER “5151”
Fast Dry
Part # 105151, 105152, 105153, 105154
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
Toluene 108-88-3 45-65 100 ppm
Methanol
67-56-1
20-25 200 ppm
Acetone
67-64-1
10-20 750 ppm
VM & P
8030-30-6
5-10 100 ppm
Xylene
1330-20-7
10-25 100 ppm
Section 2: Physical and Chemical Properties
Boiling Point: 133-340° F
Vapor Pressure: 54.1 mm Hg at 20° F
Vapor Density: Heavier than air
Evaporation rate: 2.94 (n-Butyl Acetate = 1)
Specific Gravity: 0.856 gm/cc
Appearance & Odor:
Clear, little if any color. Characteristic odor.
Solubility: 10.3
Material V.O.C. 5.35 lbs/gal
Section 3: Fire and Explosion Hazard Data
Flash Point: 0° F
Flammability Limits: LEL 2.6 UEL 36
Extinguisher Media: Dry chemical, CO2, and foam.
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard: This material is extremely flammable and may be ignited by heat, sparks, flame, or other sources of ignition. Vapors are heavier than air and may accumulate in low areas.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization will not occur.
Avoid: Storage in open container, prolonged storage above
100° F, exposure to excessive heat or open flame,
strong acids or bases, oxidizing agents, amines, anhydrides.
MSDS # 105151
Page 2 of 2
Acrylic Lacquer Thinner "5151"
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract. May cause headache, nausea, drowsiness. May cause depression of the nervous system.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: flush promptly with copious amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: wash thoroughly with soap and water. Remove contaminated cloth
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention.
INGESTION: INDUCE VOMITING if victim is conscious and alert. This material contains Methyl Alcohol and connot be made non-poisonous. Seek medical
attention and have label information available.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator with self-contained air supply is required when concentration of vapor exceed the established exposure limits.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Full face shield or safety goggles is required.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with tri-sodium phosphate and water. Large acetone spill should be reported to appropriate federal, state, and local environmental agencies.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
DOT HAZARD INDEX
Shipping Name HEALTH: 2
PAINT RELATED MATERIAL,3, FLAMMABILITY: 3
UN# 1263, PGII REACTIVITY: 0
24 HOUR EMERGENCY NUMBER 1-800-424-9300
KEEP OUT OF REACH OF CHILDREN!!
NA: NOT APPLICABLE Revised February 12, 1996
MSDS # 150330
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: KAR PREP #150330, 150332, 150336
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
V M & P
64742-89-9 50-100 400 ppm
Isopropyl Alcohol 67-63-0 0-30 400 ppm
Section 2: Physical and Chemical Properties
Boiling Point:
133-340° F
Vapor Pressure: 3.75 mm Hg at 20°F
Vapor Density: Heavier than air
Evaporation rate: .519 (n-Butyl Acetate = 1)
Specific Gravity: .742 gm/cc
Appearance & Odor:
Clear, little if any color. Characteristic
odor.
V.O.C. 5.67 lbs/gal 679.5 g/l
Section 3: Fire and Explosion Hazard Data
Flash Point: 0° F
Flammability Limits: LEL 1.0 UEL 36
Extinguisher Media: Dry chemical, CO2, or foam.
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard: This material is extremely flammable and may be ignited by heat, sparks, flame, or other sources of ignition. Vapors are heavier than air and may accumulate in low areas.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization will not occur.
Avoid: Storage in open container, prolonged storage above
100° F, exposure to excessive heat or open flame,
strong acids or bases, oxidizing agents, amines, or aphydrides.
MSDS # 150330
Page 2 of 2
Kar Prep
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract. May cause depression of the nervous system.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with large amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated clothing
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION:
INDUCE VOMITING if victim is conscious
and alert. Seek medical
attention. This material contains
Methyl Alcohol and cannot be made
non-poisonous. Seek medical attention immediately.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator with self-contained air supply is required when concentration of vapor exceed the established exposure limits.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Full face shield or safety goggles is required.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with tri-sodium phosphate and water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
DOT Shipping Name:
HAZARD INDEX
Paint Related
Material, 3,
Health
2
UN#1263, PGII
Flammability
3
Reactivity
0
NA: NOT APPLICABLE Revised: January 17,1997
MSDS # 102384
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. WEST STREET
LEBANON, OH 45036
(513) 933-8206 FAX: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: AUTOMOTIVE RESIN #102383,102384,102385
Section 1: Material Identification
Chemical Name: CAS % OSHA (TWA)
Styrene Monomer 100-42-5 35 50 ppm
Unsaturated Polyester Resin N/A 65 N/A
Section 2: Physical and Chemical Properties
Boiling Point: 295° F
Vapor Pressure: 4.5 (Styrene) at 20° F
Vapor Density: Heavier than air
Evaporation rate: Slower than Butyl Acetate
Specific Gravity: 1.8 gm/cc
Appearance & Odor: Amber opaque liquid, pungent odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: 89° F Method used TOC
Flammability Limits: LEL 1.1 UEL 6.1
Extinguisher Media: Water fog, dry chemical, CO2, and foam, or any class B extinguishing agent.
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard: If exposed to elevated temperature for extended length of time spontaneous exothermic polymerization may occur resulting in violent rupture.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization may occur if exposed to high temperature.
Avoid: Storage in open container, prolonged storage above
100° F, exposure to excessive heat or open flame,
strong acids, peroxide or other oxidizing agents.
MSDS # 102384
Page 2 of 2
Automotive Resin
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
The International Agency for Research on Cancer (IARC) has classified styrene as a possible human carcinogen (class 2B). The IARC 2B classification is not based on significant new evidence that styrene might be a carcinogen but on revised IARC classification scheme and new data on styrene oxide.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract. May cause depression of the nervous system and somewhat anesthetic.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with copious amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated cloth
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION: DO NOT INDUCE VOMITING. Seek medical attention.
Section 6: Control and Protective Measures
Respiratory: Chemical respirator with self-contained air supply is required
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Full face shield or safety goggles is required.
Ventilation: Any combination of local and general ventilation, to draw fumes away from
workers.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition, absorb with inert material such as vermiculite or sand. Sweep up and collect in containers to dispose as solid waste. Wash the area with tri-sodium phosphate and water.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store below 90° F in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
NA: NOT APPLICABLE Revised July 1997
MSDS # 104000
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: E-Z GLAZE GLAZING PUTTY #104000,104001
Section 1: Material Identification
Chemical Name: CAS % OSHA (PEL)
* Styrene Monomer 100-42-5 20-25 50 ppm
Talc
14807-96-6
50-55 2 mg/m3
Titanium Dioxide 13463-67-7 5-10 10 mg/m3
*Indicates chemical
substance is subject to reporting requirements under
SARA Title III, Part 313.
Section 2: Physical and Chemical Properties
Boiling Point 293° F Vapor Pressure: 4.50 mmHg
Vapor Density: Heavier than air % Volatile by Volume: 25.0%
Evaporation rate: Slower than Ethyl Ether
Appearance & Odor: Paste, with sharp aromatic odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: 88° F
Flammability Limits: In air by volume Lower: 1.1 Upper: 6.1
Extinguisher Media: Alcohol Foam, Carbon Dioxide, Dry Chemical, Water fog.
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard:
Polymerization may take place at elevated temperature, if
contained violent rupture may result.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization may take place at elevated temperatures, if contained violent rupture may result.
Avoid:
Prolonged storage above 100° F, strong
acid or bases, oxidizing
agents.
MSDS # 104000
Page 2 of 2
E-Z Glaze Polyester Glazing Putty
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract. High concentration of vapors may cause headache and nausea. Repeated exposure may cause liver and kidney damage.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with copious amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated cloth
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION: DO NOT INDUCE VOMITING. Seek medical attention.
Section 6: Control and Protective Measures
Respiratory:
Use appropriate, properly fitted NIOSH/MSHA approved respirator when
airborne contaminant levels exceed the TLV(s). Wear a dust mask when
sanding cured product.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Chemical splash goggles are required.
Ventilation: Use exhaust when the general ventilation is not sufficient to keep the airborne contaminate concentration below TLV.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition. Ventilate to reduce the airborne concentration below the TLV. Absorb with inert material such as vermiculite or sand. Collect in DOT approved container for proper disposal.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
NA: NOT APPLICABLE Revised August 1995
THE INFORMATION CONTAINED HEREIN, HAS BEEN COMPILED FROM CURRENT SOURCES WHICH ARE BELIEVED TO BE ACCURATE AND RELIABLE AT THIS TIME. RECIPIENTS ARE ADVISED TO CONFIRM, IN ADVANCE OF NEED, THAT THE INFORMTION IS CURRENT, APPLICABLE AND SUITABLE TO THEIR PARTICULAR CIRCUMSTNCES
MSDS # 103988
Page 1 of 2
KARDOL QUALITY PRODUCTS, INC.
265 S. West St.
Lebanon, OH 45036
(513) 933-8206 Fax: (513) 932-6900
___________________________________________________
__________________________________________________
MATERIAL SAFETY DATA SHEET
Trade Name: E-Z WAY BODY FILLER #103988
Section 1: Material Identification
Chemical Name: CAS % OSHA (PEL)
Styrene Monomer 100-42-5 15-20 50 ppm
Talc
14807-96-6
30-40 2 mg/m3
Non-hazardous Ingredients N/A 50-60 NA
Section 2: Physical and Chemical Properties
Boiling Point 295° F
Vapor Density: Heavier than air
Evaporation rate: Slower than Ether
Specific Gravity: 1.2 gm/cc(H20 = 1.0)
Appearance & Odor: Paste, with sharp aromatic odor.
Section 3: Fire and Explosion Hazard Data
Flash Point: 98° F Method used TOC
Flammability Limits: In air by volume Lower: 1.1 Upper: 6.1
Extinguisher Media: Alcohol Foam, CO2, Dry Chemical, Water fog.
Special Fire Fighting: Fire-fighter should wear self-contained breathing apparatus
to avoid inhalation of smoke and vapor.
Unusual Fire Hazard:
Polymerization may take place at elevated temperature, if
contained violent rupture may result.
Section 4: Reactivity Hazard Data
This material is stable under normal conditions.
Polymerization may take place at elevated temperatures, if contained violent rupture may result.
Avoid:
Prolonged storage above 100° F, strong
acid or bases, oxidizing
agents.
MSDS # 103988
Page 2 of 2
E-Z Body Filler
Section 5: Health Hazard Data
Primary routes of entry: Inhalation and Skin absorption.
SIGN & SYMPTOMS OF EXPOSURE: Irritating to skin, eye and all parts of respiratory tract. High concentration of vapors may cause headache and nausea. Repeated exposure may cause liver and kidney damage.
EMERGENCY FIRST AID PROCEDURE:
Eye contact: Flush promptly with copious amounts of water for 15 minutes, seek
medical attention immediately.
Skin contact: Wash thoroughly with soap and water. Remove contaminated cloth
and seek medical attention.
Inhalation: Remove victim to a well ventilated area. Use oxygen or artificial
respiration as required. Seek medical attention immediately..
INGESTION: DO NOT INDUCE VOMITING. Seek medical attention.
Section 6: Control and Protective Measures
Respiratory:
Use appropriate, properly fitted NIOSH/MSHA approved respirator when
airborne contaminant levels exceed the TLV(s). Wear a dust mask when
sanding cured product.
Gloves: Plastic or rubber chemical resistant gloves are required.
Eye protection: Chemical splash goggles are required.
Ventilation: Use exhaust when the general ventilation is not sufficient to keep the airborne contaminate concentration below TLV.
Other measures such as protective clothing, shoes, eye wash station and safety showers should be available.
Section 7: Precautions for Safe Handling and Use.
IN CASE OF SPILL:
Extinguish all sources of flame and ignition. Ventilate to reduce the airborne concentration below the TLV. Absorb with inert material such as vermiculite or sand. Collect in DOT approved container for proper disposal.
WASTE DISPOSAL:
Dispose of in accordance with local, state and federal laws and regulations.
OTHER PRECAUTIONS: Store in cool dry place; keep away from sources of heat and ignition. Use explosion proof equipment. Open containers slowly to relieve any internal pressure. Use with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN!!
NA: NOT APPLICABLE Revised August 1995
Visits this Page
Kardol Quality Products, Inc.
265 S. West Street
Lebanon, Ohio 45036
Phone: 513-933-8206
Fax: 513-932-6900
Last Revised: Friday, June 04, 2004
Cincinnati, Ohio --- Rialto, California --- Byrdstown, Tennessee --- Clearwater, Florida